Powis Parker FASTBACK 15 User Manual Page 29

  • Download
  • Add to my manuals
  • Print
  • Page
    / 60
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 28
POWISPRINTERÔ MODEL 31 USER’S MANUAL
28
B
A
D
C
DIAGRAMA/SCHÉMA/FIGURE 19
A Top Hatch
B Feed Entry
C Front Door
D Binder Exit
WARNING: Do not
touch the silver metal
bottom of the printhead.
It can be extremely hot!
PROBLEM SOLVING
E. Fixing Jams
The printer can jam a strip in four places — the feed chute, the
hatch, the front door, and the Binder Exit (figure 19). See below
to clear jams in these locations. If you can’t tell where the jam has
occurred, check all four places.
Feed Chute Jams
Carefully and slowly pull the strip out of the feed entry or feed
exit.
Hatch Jams
Open the Top Hatch (figure19). Locate the jammed strip.
Gently and carefully pull the strip out of the machine. It may
help to open the Front Door to give easier access and/or
visibility (see below).
Close the Top Hatch.
Front Door Jams
Open the Front Door (figure 19). Locate the jammed strip.
Gently and carefully pull the strip out of the machine. It may
help to open the Top Hatch to give easier access and/or
visibility (see above).
Close the Front Door.
Binder Exit Jams
If something obstructs the Binder exit, a Binderstrip™ can jam
here. To fix this, first open the Front Door.
With the Front Door open, remove the Binderstrip™ from
the Binder Exit. It should remove easily.
Close the Front Door.
A word about Binderstrips™
Sometimes during the manufacturing, Binderstrip™ fragments stick to the
Binderstrips™. These fragments — if inserted into the PowisPrinter™ — can smear
the foil, jam the machine, or even break the foil cartridge. You can avoid such mishaps
by inspecting your Binderstrip™ each time you’re about to print. If you notice any
scraps or fragments, simply brush them off the strip, then insert the strip as usual.
Page view 28
1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 59 60

Comments to this Manuals

No comments